BOOSTESS Battery Module 52.249kWh
Modular Design | Liquid-Cooled C&I Module | Indoor & Outdoor
Product Introduction
The liquid-cooled standard battery module offer energy capacity of 52.249 kWh per unit, which is used for our liquid-cooled 261kWh energy cabinet as buit-in battery, the battery module is constructed using high-performance 314Ah LFP batteries cell in a 1P52S configuration, designed for efficient and reliable energy storage in commercial and industrial applications. Equipped with advanced liquid cooling technology, it maintains a temperature difference of less than 3℃ during operation, ensuring optimal performance and longevity. This module supports parallel stacking for scalable energy storage solutions with high efficiency and meets stringent safety certifications, making it ideal for large-scale deployments.
Why Choose liquid -cooled Battery Module 52.249kWh
Zoned Thermal Insulation Solution:
Single-cell Fireproof Insulation to effectively prevent
thermal runaway
High CoolingEfficiency:
The temperature rise is kept below 5°C, with a maximum temperature delta (ΔT) of less than 3°C throughout the system
Multi-layer Fire Protection:
A PACK-level fire protection system,
featuring explosion venting design and
composite fire detection
Stamped Brazed Cold Plate Design:
The high-efficiency stamped-brazed cold plate
prevents condensation issues within the module
Long Service Life:
Utilizes premium LiFePO4 (LFP) battery cells
to ensure a long cycle life
Features
Zoned Thermal Insulation Solution
High Cooling Efficiency
Modular Design
Long Service Life
Multi-layer Fire Protection
Stamped Brazed ColdPlate Design
Liquid Cooled Battery Module Structure
Battery Cooling Plate
Battery Cell
MSD
Water Outlet
Water inlet
Upper Housing
Lower Housing
What is a liquid cooled battery module structured？
- Module housing : A robust external case, often made from an aluminum alloy, protects the internal battery components from environmental factors and mechanical damage. Support the battery module with a good mechanical structure.
- Cooling plates : They are thermal management components, which consist of thin metal plate that are placed in close contact with the battery cells.The plates are with both water inlet and outlet to keep water flow for heat dissipation
- Battery Cell :1P52S LFP Battery Cell in 314 Ah,combine 52 cells in series to ensure the safety and make efficient thermal control
- MSD: a critical safety device that provides a physical way to isolate the high-voltage battery pack. Its main functions are to enable safe maintenance, protect against short circuits, and allow for quick emergency shutdown
Liquid Cooled Battery Module 52.249kWh with energy cube 261 kWh
The Energy Cube 261 kWh features a compact and modular design, capable of housing up to five 52.249 kWh battery modules in parallel configuration. This setup enables the system to deliver a total energy capacity of 216 kWh, making it ideal for applications requiring high energy density and reliability.
Spec
Battery Parameters
| Battery Type | LFP314Ah |
|---|---|
| Battery Capacity | 52.249 kWh |
| Configuration | 1P52S |
| Nominal Voltage | 166.4V |
| Operating Voltage Range | 145.6~187.2V |
| Charge & Discharge Rate | 0.5P/0.5P |
| Cooling Method | Liquid Cooling |
| Size (W x D x H mm) | 790*1145*245 |
| Weight | 340 KG |
| Ingress Protection | IP67 |
| Certifications | IEC 62619, EN/IEC 61000, EN62477, UN38.3 |
English 
Romanian 
Polish 
German 
Spanish 
Ukrainian 
Hungarian 
Albanian 
French 
Portuguese 
Italian 
Bulgarian 
Croatian 
Czech 
Lithuanian 
Latvian